He brings me over the finish line!
July 11, 2026
As I expand my realistic dildo collection, Cyclist Clay is my first from JockTribe and I’m very happy to say he delivers a super realistic look and feel! His dual density construction gives that realistic feel with a softer and squishier outer skin layer and a firm inner core like an erect penis. The overall firmness is a little on the softer, more flexible side compared to some other dual density dildos I’ve tried. This can make for a more comfortable ride especially if you prefer a little softer overall, but can just require a bit more guiding for the initial entrance when combined with the blunt head (compared to overall firmer dildos).
Part of what drew me to Cyclist Clay is his unique shaft curve that kind of matches my own, which adds extra excitement for me with the fantasy of riding (a thicker version of) myself! Clay’s blunter head was another particular aspect I liked, as I enjoy that immediate intense stretch blunt heads give upon entering.
Cyclist Clay is recommended if you’re looking for:
- Quite realistic dildo in look and feel!
- Pronounced visual vein texturing, that is not intense in use (due to soft outer layer)
- Blunt head with slightly pronounced ridge, and a unique shaft curve to the side and downward
- Thick for the length (6.5” insertable length with 7.3” circumference)
- Suction cup base
Dimensions, inches (from JockTribe’s site): Total length 8.6”, insertable length 6.5”
Maximum shaft circumference 7.3” (maximum width 2.6” as his shaft has an oval cross-section, much wider side-to-side!)
Weight of 1.6 lb
Water resistance rating of IPX7 is also specified, although I’m not quite sure why as there are no electronics. Typically, not a concern for non-electronic dildos and toys.
My measured dimensions overall match quite closely with those specified by JockTribe.
Cyclist Clay’s blunt tip starts ~5.5” circumference to open me up, before he quickly starts stretching me wide at 6.5” circumference at the base of the tip! Going down the shaft, he gets even thicker, stretching me more and more to 7” then his peak of 7.3” circumference towards the mid shaft. But my hungry hole can’t stop there! As my hole continues to swallow him, there’s a slight reprieve as he tapers down to 6.5” circumference near the base. This also gives some of that nice mid-shaft swell getting swallowed and popping in feel.
Firmness/Material: Silicone (platinum-cured) dual density (outer layer specified as shore 00-0020 firmness and inner core as shore 0050).
JockTribe specifies the additional coloration is the same silicone as the base material.
To take advantage of Clay’s suction cup and unique shaft curve, I stuck him on the hardwood floor, lubed him up, and started riding reverse cowboy! (such that his downward curve angles towards my prostate). Starting with his blunt head forcing his way into my hole, giving me the nice filling stretch I love, I slide down his shaft that stretches my hole even more as I go.
The ridge on his head did not do much of prostate milking with it being the soft outer layer, but my insides didn’t seem to mind. His blunt head and thick shaft took plenty good care of me. The general pressure from his filling girth combined with his downward curve making his head massage my prostate with each pass as I ride up and down on him, after a bit of riding his blunt head pretty much pushed the cum out of me!
As I mentioned, Cyclist Clay’s unique sideways and downward curving shaft are one of the first noticeable aspects! This encourages some different riding positions to best utilize this curve for P (or G) spot targeting like riding reverse cowboy (or cowgirl), or mounting him on the wall and taking him in standing doggy. Or even riding him sideways for his curve to the side to target your spot in that way.
His head is one of the other defining features. Don’t be fooled by the slight taper at the start, he quickly gets blunt forcing open the hole (in a great way) and there’s no mistaking his thickness once he’s inside! The coronal ridge at the bottom of his head ends up mostly adding to the realistic visuals, rather than much feel in use. Due to the softer outer layer of the ridge, not super pronounced, and being a similar thickness as the shaft below, I did not feel it much in use. Same for the vein texturing which visually looks quite intense and adds to the realistic appearance, but in use feels pretty mild due to the squishy outer layer. However, the very pronounced underside following down the shaft urethra (technical terminology I had to look up is the “corpus spongiosum”, extra erect tissue surrounding the urethra) is noticeable during use and adds some nice texture variety to the shaft!
For the dual density construction of Cyclist Clay, starting from the tip being very squishy where there is no inner core. Then just below his head the firmer inner core starts. The thickness of the squishy outer layer stays pretty consistent down the shaft until near the base, where there is less of the outer layer and feels firmer there (where the shaft tapers down). The balls are then fully squishy. Compared to some other dual density dildos, Cyclist Clay is a little more on the softer side overall which can be a combination of a thicker squishy outer layer, inner core is not as firm, and/or inner core is thinner making up less of the overall thickness. This is neither a good or bad thing, as it is really up to preference!
That said, the greater flexibility combined with blunt head means you can’t ride him as hard for that initial entrance, but once his head has popped in it’s not an issue at all. It also can make him more comfortable once inside versus overall firmer dildos.
Clay’s suction cup is quite strong, even on my textured walls he stays put when yanking on him!
The overall sculpt and detailing of Cyclist Clay gives a very realistic appearance including the head and veins throughout the shaft. The additional coloring adds to the more realistic appearance with the red/pink coloration added to the tip and balls, and some vein coloring added over top some of the areas. When looking very closely at the added coloring over the veins, slight irregularities in the color area lining up with the vein can be seen, but this is not noticeable from afar.
The package from JockTribe arrived in a plain brown cardboard box from a generic address, no indication of the intimate contents contained in it. Inside was the JockTribe branded box that was sealed in plastic, then Cyclist Clay himself, also sealed in a plastic bag for hygiene. Also included was a JockTribe branded storage pouch, which is always a nice addition that is appreciated!
Being my first toy from JockTribe and a relatively new brand (established in the beginning of 2026) I prefer to do some of my at-home testing before use. The first pass indicators were good, price was reasonably expected for the size and construction if silicone, and no odor upon opening. So far, I’ve also done a boil test on Cyclist Clay. Silicone should have no change with boiling, whereas materials like TPE or PVC can start to melt, deform, and get sticky. The tricky thing here is dual density dildos can't be boiled forever as that can cause the dual density construction to delaminate and warp. I typically see 3-5 minutes recommended for boiling dual density dildos, so I went right in the middle, placing Cyclist Clay in a pot of boiling water (rolling boil) for around 4 minutes. I placed a towel underneath which I recommend to prevent the dildo directly touching the base or sides of the pot which can get much hotter than the boiling water.
The results of the boil test do suggest he is true silicone! There was no change in appearance or surface feel/texture from before and after boiling.
Disclaimer: This toy was provided in exchange for my honest review and contains affiliate links.